Nissan Sentra manuals

Nissan Sentra Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Commercial Service Tool


Commercial Service Tool

System description


Service Notice and Precautions for Road Wheel
Genuine NISSAN aluminum wheel is designed for each type of vehicle. Use it on the specified vehicle only. Use Genuine NISSAN parts for the road wheels, valve caps and wheel nuts. Always use ...

System description
...

Other materials:

Operating tips
When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant temperature warms up, air flow from the foot outlets will operate normally. ...

ID registration procedure
Description This procedure must be performed after replacing wheels, transmitters or the BCM, or rotating wheels. Work Procedure TPMS ID registration can be performed using one of the following procedures: Transmitter Activation tool (J-45295-A) with CONSULT (preferred method) Signal Tec ...

Front drive shaft boot
Exploded View (LH) Circular clip Dust shield Slide joint housing Snap ring Spider assembly Boot band Boot Shaft Damper band Dynamic damper Circular clip Joint sub-assembly Wheel side (RH) 6M/T Joint sub-assembly Circular clip Boot band Boot Shaft Dam ...

В© 2014-2025 Copyright www.nisentra.com