Special Service ToolSRS Air bag warning lamp does not turn ON
Diagnosis Procedure
1.CHECK COMBINATION METER POWER SUPPLY AND GROUND CIRCUIT
Check combination meter unit power supply and ground circuit. Refer to
MWI-52, "COMBINATION METER :
Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or r ...
Removal and Installation
Removal and
Installation
REMOVAL
Remove the emblem from the panel
heating with a heat gun.
CAUTION:
Do not damage the painted surface of the panel
when removing the emblem.
INSTALLATION
Note:
Do not reuse the emblem.
Ensure Niss ...
Confirmation Procedure
Confirmation Procedure
PRECONDITIONING
If “Confirmation Procedure” has been
previously conducted, always place the ignition switch OFF and wait
at least 10 seconds before conducting the next test.
>&g ...