Nissan Sentra B18 (2020-2025) Service Manual: Preparation
Engine Control System : Special Service Tool
|
Tool number (TechMate No.) Tool name |
Description |
|
|---|---|---|
|
— (NI-44321) Fuel pressure gauge kit |
 |
Checks fuel pressure |
|
— (NI-44321-6) Fuel pressure adapter |
 |
Connects fuel pressure gauge to quick connector type fuel lines. |
|
KV10120000 ( — ) Fuel tube adapter |
|
Measures fuel pressure |
Engine Control System : Commercial Service Tools Or/and Repa
|
Tool name (SPX-North America No.) |
Description |
|
|---|---|---|
|
Fuel pressure gauge |
 |
Measuring fuel pressure |
|
Leak detector |
 |
Locates the EVAP leak |
|
EVAP service port adapter |
 |
Applies positive pressure through EVAP service port |
|
Fuel filler cap adapter |
 |
Checks fuel tank vacuum relief valve opening pressure |
|
Socket wrench |
 |
Removes and installs engine coolant temperature sensor |
|
Oxygen sensor thread cleaner i.e.: (NI-43897-18) (NI-43897-12) |
 |
Reconditions the exhaust system threads before installing a new oxygen sensor. Use with anti-seize lubricant shown below. a: 18 mm diameter with pitch 1.5 mm for Zirconia Oxygen Sensor b: 12 mm diameter with pitch 1.25 mm for Titania Oxygen Sensor |
|
Anti-seize lubricant i.e.: (PermatexTM 133AR or equivalent meeting MIL specification MIL-A-907) |
 |
Lubricates oxygen sensor thread cleaning tool when reconditioning exhaust system threads. |
Preparation
...
Other materials:
Exploded View
Exploded View
With Drum Brake
1.
Rear suspension member
2.
Washer
3.
...
Compression pressure
Inspection
Warm up the engine to full operating temperature.
Release fuel pressure. Refer to EC-143, "Work Procedure".
Remove ignition coil and spark plug from each cylinder. Refer to EM-46,
"Exploded View".
Connect engine tachometer (not required in use of CONSULT). ...
Component Parts (8ch Can Gateway)
Component Parts Location
Component Parts
Location
Behind the instrument panel
(view with instrument panel
assemble removed)
...
