Nissan Sentra B18 (2020-2025) Service Manual: Power Supply and Ground Circuit
Av Control Unit
Diagnosis Procedure
Diagnosis Procedure
-
CHECK FUSE
-
Check that the following fuse is not blown:
Terminal No.
Signal name
Fuse No.
Capacity
19
Battery power supply
40
20 A
Is the fuse blown?
YES >>Replace the blown fuse after repairing the affected circuit.
NO >>GO TO 2.
-
-
CHECK POWER SUPPLY CIRCUIT
-
-
Ignition switch OFF.
-
Disconnect AV control unit connector.
-
Check voltage between AV control unit connector and ground.
AV control unit
(−)
Voltage
(Approx.)
(+)
Connector
Terminal
M103
19
Ground
Battery voltage
-
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace harness or connectors.
-
-
CHECK GROUND CIRCUIT
-
Check continuity between AV control unit connector and ground.
AV control unit
—
Continuity
Connector
Terminal
M103
20
Ground
Yes
Is the inspection result normal?
YES >>Inspection End.
NO >>Repair or replace harness or connectors.
-
Front Auxiliary Input Jacks Control Unit
Diagnosis Procedure
Diagnosis Procedure
-
CHECK FUSE
-
Check that the following fuse is not blown:
Terminal No.
Signal name
Fuse No.
Capacity
19
Battery power supply
40
20 A
Is the fuse blown?
YES >>Replace the blown fuse after repairing the affected circuit.
NO >>GO TO 2.
-
-
CHECK POWER SUPPLY CIRCUIT
-
-
Ignition switch OFF.
-
Disconnect front auxiliary input jacks control unit connector.
-
Check voltage between front auxiliary input jacks control unit connector and ground.
Front auxiliary input jacks control unit
(−)
Voltage
(Approx.)
(+)
Connector
Terminal
M116
1
Ground
Battery voltage
-
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace harness or connectors.
-
-
CHECK GROUND CIRCUIT
-
Check continuity between front auxiliary input jacks control unit connector and ground.
Front auxiliary input jacks control unit
—
Continuity
Connector
Terminal
M116
4
Ground
Yes
Is the inspection result normal?
YES >>Inspection End.
NO >>Repair or replace harness or connectors.
-
Other materials:
Forward-facing child restraint installation using the seat belts
WARNING
The three-point seat belt with Automatic Locking Retractor (ALR) must always
be used when installing a child restraint in the Nissan Sentra.
Failure to activate and use the ALR mode will prevent the child restraint
from being properly secured. An unsecured or unstable restraint may tip ...
Front Suspension. Removal and Installation
Front Coil Spring and Strut
Exploded View
Exploded View
1.
Steering knuckle
2.
Strut
3.
...
How to use the remote keyless entry function
The remote keyless entry function on the Nissan Sentra allows you to control
all door locks using the Intelligent Key. This convenient system enables locking
and unlocking of the doors from a distance of up to approximately 33 ft (10 m) away
from the vehicle, depending on surrounding condition ...