Ipdm E/r (intelligent Power Distribution Module Engine Room)
Diagnosis Procedure
CHECK FUSE AND FUSIBLE LINKS
Check that the following IPDM E/R fuse or fusible links are not blown:
|
Terminal |
Signal name |
Fuse and fusible link No. |
Capacity |
|---|---|---|---|
|
1 |
Battery power supply |
D |
80 A |
|
2 |
E |
80 A |
|
|
81 |
B |
300 A |
|
|
70 |
40 A |
Is the fuse or fusible link blown?
YES >>Replace the blown fuse or fusible link after repairing the affected circuit.
NO >>GO TO 2.
CHECK POWER SUPPLY CIRCUIT
Ignition switch OFF.
Disconnect IPDM E/R connectors.
Check voltage between IPDM E/R harness connectors and ground.
|
IPDM E/R |
— |
Voltage (Approx.) |
|
|---|---|---|---|
|
Connector |
Terminal |
||
|
E42 |
1 |
Ground |
Battery voltage |
|
2 |
|||
|
F97 |
81 |
||
Is the inspection result normal?
YES >>GO TO 3.
NO >>Repair harness or connectors.
CHECK GROUND CIRCUIT
Disconnect IPDM E/R connectors.
Check continuity between IPDM E/R harness connectors and ground.
|
IPDM E/R |
— |
Continuity |
|
|---|---|---|---|
|
Connector |
Terminal |
||
|
E47 |
12 |
Ground |
Yes |
|
E43 |
31 |
||
|
E45 |
47 |
||
Is the inspection result normal?
YES>>Inspection End.
NO>>Repair harness or connectors.
Exploded View
Exploded View
1.
Front suspension member
2.
Member stay
A.
Refer to Ins ...
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system ...
Starting system (without intelligent key)
Wiring Diagram
...