Nissan Sentra B18 (2020-2025) Service Manual: Outside Key Antenna (rear Door Rh)
Removal and Installation
REMOVAL
Remove rear door finisher (RH). Refer to Removal and Installation.
Disconnect the harness connector from the outside key antenna (rear door RH).
Release clips and remove outside key antenna (rear door RH).
INSTALLATION
Installation is in the reverse order of removal.
Outside Key Antenna (rear Door Lh)
Removal and Installation
Removal and Installation
REMOVAL
Remove rear
door finisher (LH). Refer to Removal and Installation.
Disconnect
the harness connector from the outside key a ...
Outside Key Antenna (rear Bumper)
Removal and Installation
Removal and Installation
REMOVAL
Remove rear
bumper. Refer to Removal and Installation.
Disconnect
the harness connector from the outside key antenna [rear ...
Other materials:
Removal and Installation
Removal and Installation
REMOVAL
CAUTION:
When replacing the sonar control unit, perform
"ADDITIONAL SERVICE WHEN REPLACING SONAR CONTROL UNIT". Refer to Work Procedure.
Partially
remove the trunk side finisher (LH). Refer to Exploded View.
Remove bolt
(A) from ...
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS ...
Exploded View
Exploded View
1.
Front bumper side bracket (RH)
2.
Front bumper reinforcement support
(RH)
...
