Nissan Sentra B18 (2020-2025) Service Manual: Intelligent Key System All Functions Cannot Operate (all Keys)
Description
Description
Intelligent Key system all functions cannot operate (door lock and engine start).
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)
|
Door lock operation (remote keyless entry) |
Door lock operation (request switch) or trunk open operation (opener switch of trunk lid) |
Engine started with push-button ignition switch operation (registered Intelligent Key is within the detection area of inside key antenna) |
Engine started with push-button ignition switch operation (registered Intelligent Key placed next to push-button ignition switch) |
|---|---|---|---|
|
NG |
NG |
No start |
No start |
CONDITIONS OF Nissan Sentra Vehicle (OPERATING CONDITIONS)
“ENGINE START BY I-KEY” setting in “Work support” mode of “HANDS FREE MODULE” is ON.
DIAGNOSIS PROCEDURE
Refer to Diagnosis Procedure.
Diagnosis Procedure
Diagnosis Procedure
-
CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
-
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
GO TO 2.
-
-
CHECK INTELLIGENT KEY-1
-
For both Intelligent Key that cannot be used for door lock and unlock, check that the Intelligent Key belongs to the Nissan Sentra vehicle to be checked.
-
Check if the Intelligent Key that is checked is the Intelligent Key for a different NISSAN/INFINITI Nissan Sentra vehicle that the user owns.
-
Check that the Intelligent Key buttons match the vehicle specifications.
-
Does the Intelligent Key belong to the Nissan Sentra vehicle to be checked?
YES >>GO TO 3.
NO >>Check Intelligent Key button operation using a registered Intelligent Key that belongs to the Nissan Sentra vehicle.
-
-
CHECK INTELLIGENT KEY-2
-
Check the inside of the both Intelligent Key for rust or corrosion by water. Simultaneously check the internal circuits for damage.
Is the inspection result normal?
YES >>GO TO 4.
NO >>Replace Intelligent Key.
-
-
REGISTER INTELLIGENT KEY
-
-
Register the Intelligent Key again.
-
Check operation after replacement.
-
Is the inspection result normal?
YES >>Inspection End.
NO >>GO TO 5.
-
-
REPLACE INTELLIGENT KEY
-
-
Replace the Intelligent Key and perform registration again.
-
Check operation after replacement.
-
Is the inspection result normal?
YES >>Inspection End.
NO >>GO TO 6.
-
-
REPLACE INTELLIGENT KEY UNIT
-
-
Replace Intelligent Key unit. Refer to Removal and installation.
-
Check the operation after replacement.
-
Is the inspection result normal?
YES>>Inspection End.
NO>>Check intermittent incident. Refer to Intermittent Incident.
-
Other materials:
Diagnosis System (bcm)
Common Item
Consult Function (bcm - Common Item)
CONSULT Function (BCM - COMMON ITEM)
BCM
Refer to CONSULT Function (BCM - COMMON ITEM).
Intelligent Key
Consult Function (bcm - In ...
B2083-23 Request Sw (fr)
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC Detection Condition
...
P059f Active Grille Shutter
Dtc Description
DTC Description
DTC DETECTION LOGIC
Active grille shutter normally stops within zone which
is defined by zone (90°±20°).
If the active grille shutter stops within zone stuck
error is detected, and if the active grille shutter stops at position beyond
zon ...