Nissan Sentra B18 (2020-2025) Service Manual: Intelligent Around View Monitor System
Symptom Table
INTELLIGENT AROUND VIEW MONITOR SYSTEM
Note:
Inspect the Nissan Sentra vehicle for a front license plate frame or cover. If there is a front license plate frame or cover, the front camera will see it and show it on the monitor.
|
Symptom |
Check items |
Probable malfunction location |
|
|---|---|---|---|
|
Screen is not switched to camera image when CAMERA button is pressed or when shift position is shifted to “R”. |
“AVM” is not displayed on the system selection screen of CONSULT. |
Around view monitor control unit power supply or ground circuit. Refer to Diagnosis Procedure. |
|
|
Check that Data Monitor item values are normal using CONSULT:
|
CAMERA SWITCH SIGNAL and REVERSE SIGNAL are normal. |
Around view monitor control unit. Refer to Removal and Installation. |
|
|
CAMERA SWITCH SIGNAL is not normal. |
Camera switch signal circuit. Refer to Reference Value. |
||
|
REVERSE SIGNAL is not normal. |
Reverse signal circuit. Refer to Reference Value. |
||
|
Check the following Data Monitor item using CONSULT:
|
F-CAMERA IMAGE SIGNAL: NG |
Front camera power supply circuit and image signal circuit. Refer to DTC Diagnosis Procedure. |
|
Check the following Data Monitor item using CONSULT:
|
REAR CAMERA IMAGE SIGNAL: NG |
Rear camera power supply circuit and image signal circuit. Refer to DTC Diagnosis Procedure. |
|
LH side of around view screen is not displayed. |
Check the following Data Monitor item using CONSULT:
|
DR-SIDE CAMERA IMAGE SIGNAL: NG |
Side camera LH power supply circuit and image signal circuit. Refer to DTC Diagnosis Procedure. |
|
Check the following Data Monitor item using CONSULT:
|
PA-SIDE CAMERA IMAGE SIGNAL: NG |
Side camera RH power supply circuit and image signal circuit. Refer to DTC Diagnosis Procedure. |
Other materials:
P044b Egr Volume Control Valve Position Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Warning Chime System
System Description
System Description
SYSTEM DIAGRAM
DESCRIPTION
Combination Meter:
The combination meter sounds the alarm buzzer installed
in the combination meter when receiving the buzzer output signal transmitted
from each unit.
BCM:
BCM receives signals from various un ...
Seat Belt Warning Lamp System
System Description
System Description
SYSTEM DIAGRAM
System Description
The seat belt warning lamp (1) will remind the
driver if the driver or front passenger seat belt should be
buckled. The system works in conjunction with the occupant
classification system. Refer to System ...
