Nissan Sentra B18 (2020-2025) Service Manual: Int Lamp
Consult Function (bcm - Int Lamp)
CONSULT Function (BCM - INT LAMP)
DATA MONITOR
Note:
The following table includes information (items) inapplicable to this Nissan Sentra vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
|
Monitor item [Unit] |
Description |
|---|---|
|
CDL LOCK SW [On/Off] |
Indicated [On/Off] condition of lock signal from door lock and unlock switch |
|
CDL UNLOCK SW [On/Off] |
Indicated [On/Off] condition of unlock signal from door lock and unlock switch |
|
Door switch DR [On/Off] |
Indicated [On/Off] condition of front door switch LH |
|
Door switch AS [On/Off] |
Indicated [On/Off] condition of front door switch RH |
|
Door switch RL [On/Off] |
Indicated [On/Off] condition of rear door switch LH |
|
Door switch RR [On/Off] |
Indicated [On/Off] condition of rear door switch RH |
|
START SW [On/Off] |
Note:
This item is displayed, but cannot be monitored |
ACTIVE TEST
|
Test item |
Operation |
Description |
|---|---|---|
|
INT LAMP |
On |
Outputs interior room lamp control signal. |
|
Off |
Stops interior room lamp control signal. |
|
|
Stop start OFF switch indicator |
On |
Output start/stop off switch indicator signal. |
|
Off |
Stop start/stop off switch indicator signal. |
Other materials:
Evap Control System Pressure Sensor
Component Inspection
Component Inspection
CHECK EVAP CONTROL SYSTEM PRESSURE
SENSOR
Turn ignition switch OFF.
Remove EVAP control system pressure
sensor with its harness connector connected from
EV ...
P2769-00 Torque Converter Clutch
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
Evap Canister Purge Volume Control Solenoid Valve
Removal and Installation
Removal and Installation
REMOVAL
Disconnect
harness connector (A) from EVAP canister purge volume control
solenoid valve (3).
Remove EVAP
hose B (1) and EVAP hose C (2) from EVAP canister purge volume
control solenoid valve.
Remove nut
...