Nissan Sentra B18 (2020-2025) Service Manual: Instrument Panel :: Preparation
Preparation. Special Service Tools
Special Service Tools
|
Tool number (TechMate No.) Tool name |
Description |
|
|---|---|---|
|
 — (NI-39570) Chassis Ear |
![]() |
Locating the noise |
|
  — (NI-50397) Squeak and Rattle Kit |
![]() |
Repairing the cause of noise |
|
 — (NI-46534) Trim Tool Set |
![]() |
Removing trim components |
Commercial Service Tools
Commercial Service Tools
|
(TechMate No.) Tool name |
Description |
|
|---|---|---|
|
(NI-39565) Engine Ear |
![]() |
Locating the noise |
|
( — ) Power tool |
![]() |
Loosening nuts, screws and bolts |
Clip List. Descriptions for Clips. Descriptions for Clips
Descriptions for Clips
Replace any clips which are damaged during removal or installation.




Other materials:
How to park with predicted course lines
WARNING
If the tires on the Nissan Sentra are replaced with tires of a different
size, the predicted course lines may not be displayed accurately, which can
affect parking guidance.
On snow-covered, icy, or slippery roads, there may be a noticeable difference
between the predicted cou ...
P0611 Ecm Protection
Dtc Description
DTC Description
This DTC is detected when the ECM protective function is activated
due to an extreme temperature increase in ECM, resulting from severe conditions
such as heavy load driving.
DTC DETECTION LOGIC
...
Front Auxiliary Input Jacks
Diagnosis Procedure
Diagnosis Procedure
AUX JACK
CHECK AUX JACK HARNESS CONTINUITY
Ignition switch OFF.
Disconnect AV control unit connector and front
auxiliary input j ...




