Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Owner's Manual: Instrument panel

Nissan Sentra instrument panel dashboard controls and indicators

This instrument panel overview helps Nissan Sentra drivers quickly identify switches, displays, and controls essential for safe vehicle operation.

  1. Headlight/turn signal switch
  2. Steering wheel switch
    Audio controls
  3. Driver's supplemental air bag
    Horn
  4. Meters and gauges
    Warning and indicator lights
    Vehicle information display
  5. Cruise control switches
    Intelligent Cruise Control (ICC) switches (if so equipped)
    Bluetooth Hands-Free Phone System
  6. Wiper and washer switch
  7. Vents
  8. Idling Stop OFF switch (if so equipped)
  9. Hazard warning flasher switch
  10. Front passenger air bag status light
  11. Audio system
  12. Front passenger supplemental air bag
  13. Glove box
  14. Front passenger supplemental knee air bag
  15. Shift lever
  16. Push-button ignition switch
  17. Climate controls
  18. Driver supplemental knee air bag
  19. Tilt/Telescopic steering
  20. Hood release
  21. Fuel filler door release
  22. ECO mode switch
    Instrument brightness control
    Trunk release
    Trip reset switch
Passenger compartment
The passenger compartment illustration of the Nissan Sentra shows the main interior comfort and convenience features available to occupants. Interior lights for front and rear seating areas ...

Engine compartment check locations
2.0L 4 cylinder (MR20DD engine model) This illustration shows the main service and inspection points in the Nissan Sentra engine compartment, allowing owners to perform basic checks with confid ...

Other materials:

System
System Diagram System Description FRONT WIPER CONTROL (BASIC) BCM detects the combination switch position by the combination switch reading function. BCM transmits the front wiper request signal to the IPDM E/R using CAN communication. IPDM E/R controls the integrated front wipe ...

Ambient sensor signal circuit
Description It detects outside air temperature and converts it into a resistance value which is then input into the combination meter. Diagnosis Procedure Regarding wiring diagram information, refer to mwi-28, "wiring diagram". 1.Check ambient sensor signal circuit Turn igniti ...

Power Supply and Ground Circuit
Diagnosis Procedure Diagnosis Procedure CHECK FUSE Check that the following fuse is not blown: Signal name Fuse ...

В© 2014-2026 Copyright www.nisentra.com