Nissan Sentra B18 (2020-2025) Service Manual: Inspection and Adjustment
INSPECTION AFTER REMOVAL
-
Check the clutch tube for cracks and damage. If the clutch tube has cracks or damage, replace it with a new one.
-
Check the O-ring of the clutch tube for cracks and damage. If the O-ring of the clutch tube has cracks or damage, replace clutch tube with a new one.
CAUTION:
Do not reuse O-rings.
-
Check the clutch damper for cracks and damage. If the clutch damper has cracks or damage, replace it with a new one.
INSPECTION AFTER INSTALLATION
Check the fluid leakage and the fluid level. Refer to Inspection.
Check the clutch pedal height. Refer to Inspection and Adjustment.
ADJUSTMENT AFTER INSTALLATION
Perform the air bleeding procedure. Refer to Air Bleeding.
Removal and Installation
Removal and Installation
CAUTION:
Keep painted surface on the body or other parts
free of clutch fluid. If it spills, wipe up immediately and wash
the affected area with water.
...
Other materials:
Towing your vehicle
When towing your vehicle, all State (Provincial in
Canada) and local regulations for towing must be
followed. Incorrect towing equipment could damage
your vehicle. Towing instructions are available
from a NISSAN dealer. Local service operators
are generally familiar with the applicable laws
an ...
Wiper and washer system symptoms
Symptom table
Caution:
Perform the self-diagnosis with consult before performing the diagnosis
by symptom. Perform the
diagnosis by dtc if dtc is detected.
...
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection condition
...
