Nissan Sentra B18 (2020-2025) Service Manual: In-Cabin Microfilter
Removal and Installation
Removal and Installation
REMOVAL
Remove glove box assembly. Refer to Removal and Installation.
Remove the in-cabin microfilter cover.
Remove in-cabin microfilter.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, check that the in-cabin microfilter cover is securely fastened to the heating and cooling unit assembly.
Other materials:
P0315 Ckp Sensor (pos)
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
P0137 Ho2s2
Dtc Description
DTC Description
The heated oxygen sensor 2 has a much longer switching time
between rich and lean than the air fuel ratio (A/F) sensor 1. The oxygen storage
capacity of the three way catalyst (manifold) causes the longer switching
time.
...
Sunload Sensor
Diagnosis Procedure
Diagnosis Procedure
CHECK SUNLOAD SENSOR SIGNAL
Ignition switch ON.
Check voltage between A/C auto amp. harness connector.
...