Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: Hvac Branch Line Circuit

Diagnosis Procedure

Diagnosis Procedure

  1. CHECK CONNECTOR

    1. Turn the ignition switch OFF.

    2. Disconnect the battery cable from the negative terminal.

    3. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side).

      • A/C auto amp. (With auto A/C)

      • A/C amp. (With manual A/C)

    Is the inspection result normal?

    YES >>

    GO TO 2.

    NO >>

    Repair the terminal and connector.

  2. CHECK HARNESS FOR OPEN CIRCUIT

    1. Disconnect the following connectors.

      • A/C auto amp. (With auto A/C)

      • A/C amp. (With manual A/C)

    2. Check the resistance between the following harness connector terminals.

      • With auto A/C

        A/C auto amp. harness connector

        Resistance (Ω)

        Connector No.

        Terminal No.

        M34

        50

        70

        Approx. 54 – 66

      • With manual A/C

        A/C amp. harness connector

        Resistance (Ω)

        Connector No.

        Terminal No.

        M82

        50

        70

        Approx. 54 – 66

    Is the measurement value within the specification?

    YES >>

    GO TO 3.

    NO >>

    Repair the following.

    • A/C auto amp. branch line (With auto A/C)

    • A/C amp. branch line (With manual A/C)

  3. CHECK POWER SUPPLY AND GROUND CIRCUIT

    Check the power supply and the ground circuit of the A/C auto amp. (With auto A/C) or A/C amp. (With manual A/C). Refer to the following.

    • With automatic air conditioning: Diagnosis Procedure

    • With manual air conditioning: Diagnosis Procedure

    Is the inspection result normal?

    YES (Present error) >>

    Replace the A/C auto amp. (With auto A/C) or A/C amp. (With manual A/C). Refer to the following.

    • With automatic air conditioning: Removal and Installation

    • With manual air conditioning: Removal and Installation

    YES (Past error) >>

    Error was detected in the following.

    • A/C auto amp. branch line (With auto A/C)

    • A/C amp. branch line (With manual A/C)

    NO >>

    Repair the power supply and the ground circuit.

    A-Bag Branch Line Circuit
    Diagnosis Procedure Diagnosis Procedure Warning: Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes or more. (To discharge back...
    Sonar Branch Line Circuit
    Diagnosis Procedure Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and ...

    Other materials:

    Low Tire Pressure Warning Lamp Does Not Turn Off
    Symptom Description Symptom Description The low tire pressure warning lamp does not turn OFF after several seconds is passed after the engine starts. Diagnosis Procedure Diagnosis Procedure CHECK TIRE PRESSURE Ignition switch ...

    Squeak and Rattle Trouble Diagnoses
    Work Flow Work Flow CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any customer's comments; refer ...

    C1714-7b Low Tire Pressure Rr
    Dtc Description DTC Description Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure rep ...