Nissan Sentra B18 (2020-2025) Service Manual: Generator
|
Type |
MR20DD |
|||
|
F000BL079B |
||||
|
SEG AUTOMOTIVE |
||||
|
Nominal rating |
[V - A] |
14V-120A |
||
|
Ground polarity |
Negative |
|||
|
Minimum revolution under no-load (When 13.5 V is applied) |
[rpm] |
1,000 |
||
|
Hot output current (When 13.5 V is applied) |
[A/rpm] |
More than 70/1,800 More than 120/6,000 |
||
|
Regulated output voltage |
[V] |
14.1 - 14.7 |
||
*: Always check with the Parts Department for the latest parts information.
Other materials:
Basic inspection
Diagnosis and repair workflow
Work flow
OVERALL SEQUENCE
DETAILED FLOW
1.GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition
and the environment when the
incident/malfunction occurred).
>> GO TO 2
2.CONFIRM THE SYMPTOM
Try to ...
Fuel gauge
NOTE:
The ignition switch must be placed in the
ON position for the gauge to give a reading.
The gauge indicates the approximate fuel level
in the tank.
The gauge may move slightly during braking,
turning, acceleration, or going up or down hills.
The low fuel warning light comes on when ...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported ...
