GeneratorDtc Confirmation Procedure
DTC Confirmation Procedure
DTC CONFIRMATION
CONSULT
Ignition switch ON and wait for 2 seconds or
more.
Select “Self Diagnostic Result” mode
...
Power Supply and Ground Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK FUSE
Check that the following fuse is not
blown:
Signal
name
Fuse
...
Fuel injector
Component Function Check
1.INSPECTION START
Turn ignition switch to START.
Is any cylinder ignited?
YES >> GO TO 2.
NO >> Proceed to EC-450, "Diagnosis Procedure".
2.CHECK FUEL INJECTOR FUNCTION
With CONSULT
Start engine.
Perform “POWER BALANCE” in ...