Nissan Sentra B18 (2020-2025) Service Manual: Front Door Speaker
Diagnosis Procedure
Diagnosis Procedure
-
CONNECTOR CHECK
-
Check the AV control unit and speaker connectors for the following:
-
Proper connection
-
Damage
-
Disconnected or loose terminals
-
Is the inspection result normal?
YES >>GO TO 2.
NO >>Repair the terminals or connectors.
-
-
CHECK FRONT DOOR SPEAKER SIGNAL CIRCUIT CONTINUITY
-
-
Disconnect AV control unit connector and suspect front door speaker connector.
-
Check continuity between AV control unit connector and suspect front door speaker connector.
AV control unit
Front door speaker
Continuity
Connector
Terminal
Connector
Terminal
M92
2
D10 (LH)
1
Yes
3
2
11
D110 (RH)
1
12
2
-
Check continuity between AV control unit connector M92 and ground.
AV control unit
—
Continuity
Connector
Terminal
M92
2
Ground
No
3
11
12
-
Is the inspection result normal?
YES >>GO TO 3.
NO >>Repair or replace harness or connectors.
-
-
CHECK FRONT DOOR SPEAKER SIGNAL
-
-
Connect AV control unit connector and suspect front door speaker connector.
-
Ignition switch ON.
-
AV control unit ON.
-
Check signal between the terminals of AV control unit connector.
AV control unit
Condition
Reference value
Connector
(+)
(−)
Terminal
Terminal
M92
2
3
Audio signal output

11
12
-
Is the inspection result normal?
YES >>Replace front door speaker. Refer to Removal and Installation.
NO >>Replace AV control unit. Refer to Removal and Installation.
-
Other materials:
Body Control System. Preparation. Preparation. Special Service Tool
Preparation. Special Service Tool
Special Service Tool
Special Service Tool
The actual shape of the tools may differ from those
illustrated here.
Tool number
(TechMate No.)
Tool name
...
Hazard Switch
Component Inspection
Component Inspection
CHECK HAZARD SWITCH
Ignition switch OFF.
Disconnect hazard switch connector.
Check continuity between hazar ...
Power Supply, Ground & Circuit Elements. Basic Inspection
Battery
How to Handle Battery
How to Handle Battery
CAUTION:
If it becomes necessary to start the engine with
a booster battery and jumper cables, use a 12-volt booster
battery.
After connecting battery cables, ensure that they
...