Nissan Sentra B18 (2020-2025) Service Manual: Front Door Outside Molding
Removal and Installation
REMOVAL
Lower front door window.
Using suitable tool, lift forward end of front door outside molding and release from front door.
CAUTION:
Use care when lifting front door outside molding to prevent damage.
Using suitable tool, lift rear end of front door outside molding to release pawl and remove. Refer to Exploded View.
INSTALLATION
Installation is in the reverse order of removal.
Exploded View
Exploded View
1.
Front door outside
molding
...
Rear Door Outside Molding
Removal and Installation
Removal and Installation
REMOVAL
Lower rear
door window.
Peel back
rear door weather strip (1) and remove screw (A).
Using
suitable tool, lift rear ...
Other materials:
Blower Motor
Diagnosis Procedure
Diagnosis Procedure
CHECK FUSE
Ignition switch OFF.
Check 30A fuse [No. 55, located in fuse block
(J/B)].
...
High-Pressure Flexible Hose
Removal and Installation
Removal and Installation
REMOVAL
Discharge
the refrigerant. Refer to Recycle Refrigerant.
Remove
front under cover. Refer to Removal and Installation.
Remove nut
(A) and disconnect the high-pressure flexible hose (1) from
compressor (2).
R ...
Wiper and washer switch
Switch operation
WARNING
In freezing temperatures, windshield washer fluid may freeze on the glass
surface and temporarily reduce visibility, which could lead to an accident. Always
warm the windshield using the defroster before operating the washer system on your
Nissan Sentra.
CAUTION ...
