Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Owner's Manual / Do-it-yourself / Engine compartment check locations

Nissan Sentra B18 (2020-2025) Owner's Manual: Engine compartment check locations

Nissan Sentra engine compartment check locations

2.0L 4 cylinder (MR20DD engine model)

  1. Engine oil filler cap
  2. Brake and clutch (if so equipped) fluid reservoir
  3. Fuse and relay box
  4. Battery
  5. Air cleaner
  6. Engine oil dipstick
  7. Drive belt location
  8. Windshield-washer fluid reservoir
  9. Engine coolant reservoir

NOTE:

Your Nissan Sentra may not be equipped with an engine cover, depending on model and production specification.

    Maintenance precautions
    When performing any inspection, servicing, or maintenance work on your Nissan Sentra, always exercise extreme care to avoid serious personal injury or accidental damage to the v...
    Engine cooling system
    The engine cooling system of the Nissan Sentra is factory-filled with a pre-diluted mixture consisting of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water. T...

    Other materials:

    Vehicle Dynamic Control (VDC) system
    The Vehicle Dynamic Control (VDC) system on the Nissan Sentra uses multiple advanced sensors to continuously monitor driver inputs, wheel speed, steering angle, and overall vehicle motion in real time. Under certain driving conditions, the Nissan Sentra VDC system actively supports vehicle st ...

    Rear Side Air Bag Module. Removal and Installation
    Removal and Installation Removal and Installation Warning: Before servicing the SRS, place the ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes. Do not use air tools or electric ...

    Ecu Diagnosis Information. Tcm
    Tcm Reference Value Reference Value CONSULT DATA MONITOR STANDARD VALUE In CONSULT, electric shift timing or lock-up timing, i.e. operation timing of each solenoid valve, is displayed. Therefore, if there is an obvious difference between the shift timing estimated ...