Other materials:

Values on the Diagnosis Tool
Values on the Diagnosis Tool Note: The Signal Tech II Tool [— (NI-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. Check Intelligent Key relative signal strength Confirm Nis ...

U1010 Control unit (CAN)
Description Air bag diagnosis sensor performs self-tests on key ON. If CAN communication failure within control unit is detected, DTC is set. DTC Logic DTC DETECTION LOGIC CONSULT name DTC DTC detecting condition Repair order CAN CONTROL UNIT FAILURE U1010 CAN ...

Rear Side Air Bag Module. Removal and Installation
Removal and Installation Removal and Installation Warning: Before servicing the SRS, place the ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes. Do not use air tools or electric ...