Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Driver Information & Multimedia / Sonar System :: Dtc/circuit Diagnosis / U214f Can Comm Err (bcm) / Dtc Diagnosis Procedure

DTC Diagnosis Procedure

PERFORM DTC CONFIRMATION PROCEDURE AGAIN
1. CONSULT
  1. Ignition switch ON.
  2. Erase DTC.
  3. Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure.
Is DTC U214F–87 detected?
YES>>
Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.
NO>>
Inspection End.

Confirmation Procedure

Confirmation Procedure DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON. Igni ...

U2152 Can Comm Err (adas Control Unit)

...

Other materials:

Diagnosis and Repair Workflow
Work Flow Work flow OVERALL SEQUENCE Reference 1: On Board Diagnosis Function. Reference 2: DTC Index. Reference 3: Diagnosis Procedure. Reference 4: Component Inspection. Reference 5: Diagnosis Procedure. ...

Door Mirror Cover
Removal and Installation Removal and Installation REMOVAL Note: With side turn signal lamp shown, without is similar. Remove glass mirror. Refer to Removal and Installation. Using a suitable tool, release pawls and remove the door mirror cover (1) from the door mirro ...

Battery Disconnect
Battery Disconnect Warning: Battery acid and battery acid fumes are extremely dangerous and can cause severe burns and explosion. To help reduce the risk of personal injury: Wear appropriate goggles and protective clothing. ...