Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Driver Information & Multimedia / Sonar System :: Dtc/circuit Diagnosis / U2141 Mac Comm Error (tcm) / Dtc Diagnosis Procedure

DTC Diagnosis Procedure

PERFORM DTC CONFIRMATION PROCEDURE AGAIN
1. CONSULT
  1. Ignition switch ON.
  2. Erase DTC.
  3. Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure.
Is DTC U2141–87 detected?
YES>>
Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.
NO>>
Inspection End.

Confirmation Procedure

Confirmation Procedure DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON. Igni ...

U2148 Mac Comm Error [abs Actuator and Electric Unit (control

...

Other materials:

Diagnosis Procedure
Diagnosis Procedure CHECK HEATED STEERING WHEEL Check heated steering wheel. Refer to Component Inspection. Is the inspection result normal? YES >> GO TO 2. NO >> Replace heated steering wheel. ...

Dtc Description
DTC Description Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported by the TPMS ...

Dtc Confirmation Procedure
DTC Confirmation Procedure DTC CONFIRMATION CONSULT Erase DTC. Ignition switch OFF. Select “Self Diagnostic Result” mode of "BCM", ...