CHECK CAN COMMUNICATION
Check CAN communication. Refer to Trouble Diagnosis Flow Chart.
Is DTC “U214E-87” displayed?
YES >>Repair or replace the malfunctioning part.
NO >>Check intermittent incident. Refer to Intermittent Incident.
Confirmation ProcedureConfirmation Procedure
Confirmation Procedure
PERFORM DTC CONFIRMATION
PROCEDURE
CONSULT
Ignition switch ON and wait for 2 seconds or
more.
Select “Self Diagnostic Re ...
Driver Assistance Buzzer
Removal and Installation
Removal and
Installation
REMOVAL
Remove left knee air bag module.
Refer to Removal and Installation.
Remove steering column covers. Refer
to Removal and Installation.
Remove screw (A) from driver assistance
buzzer (1).
Disconnect harness co ...
Strg branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the steering angle sensor for
damage, bend and loose connection
(unit side and connector side).
Is the inspection result ...