Nissan Sentra B18 (2020-2025) Service Manual: Dtc Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|---|---|---|---|
|
C161C-86 |
ST angle sensor system (Steering angle sensor system) |
Diagnosis condition |
When ignition switch is ON. |
|
Signal (terminal) |
CAN communication signal |
||
|
Threshold |
When a malfunction is detected in chassis control module (with built in steering angle sensor). |
||
|
Diagnosis delay time |
2 seconds or more |
||
POSSIBLE CAUSE
-
CAN communication line
-
Chassis control module (with built in steering angle sensor)
-
ABS actuator and electric unit (control unit)
-
EPS control unit
FAIL-SAFE
Normal control
Confirmation Procedure
Confirmation Procedure
PRECONDITIONING
If “Confirmation Procedure” has been
previously conducted, always place the ignition switch OFF and wait
...
Other materials:
Precautions for Work
Precautions for Work
When removing or disassembling each component, be
careful not to damage or deform it. If a component may be subject
to interference, be sure to protect it with a shop cloth.
When removing (disengaging) components with a
screw ...
Front passenger air bag and status light
WARNING
The front passenger air bag and front passenger supplemental knee air bag
in the Nissan Sentra are designed to automatically turn OFF under certain conditions.
Carefully read this section to fully understand how this system operates.
Correct use of the seat, seat belt and child ...
Ecm branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the ecm for damage, bend and loose
connection (unit side and
connector side).
Is the inspection result normal?
YES > ...
