Nissan Sentra B18 (2020-2025) Service Manual: Dtc Description
The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
-
Activate and display TPMS sensor IDs
-
Display tire pressure reported by the TPMS sensor
-
Read TPMS DTCs
-
Register TPMS sensor IDs
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|---|---|---|---|
|
C1700–86 |
Control unit (Control unit) |
Diagnosis condition |
Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or more. Note:
When DTC is memorized, DTC is displayed again at ignition switch ON. |
|
Signal (terminal) |
Nissan Sentra Vehicle speed signal |
||
|
Threshold |
Nissan Sentra Vehicle speed signal is not detected. |
||
|
Diagnosis delay time |
2 seconds or more. |
||
POSSIBLE CAUSES
-
CAN communication
-
ABS actuator and electric unit (control unit) malfunction
-
BCM
FAIL-SAFE
—
Dtc Confirmation Procedure
DTC Confirmation
Procedure
CONFIRMATION PROCEDURE
CONSULT
Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or more. ...
Other materials:
Preparation
Special Service Tool
Special Service Tool
The actual shape of the tools may differ from those
illustrated here.
Tool number
(TechMate No.)
Tool name
Descriptio ...
DTC/circuit diagnosis
POWER SUPPLY AND GROUND CIRCUIT
A/C AUTO AMP.
A/C AUTO AMP. : Diagnosis Procedure
Regarding Wiring Diagram information, refer to HAC-145, "Wiring Diagram" or
HAC-152, "Wiring Diagram".
1.CHECK FUSE
Check fuses [No. 5, 8 and 21, located in the fuse block (J/B)].
NOTE:
Ref ...
P0365 Exhaust Valve Timing Control Position Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
