Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON.
-
Ignition switch OFF and wait at least 30 seconds.
-
Ignition switch ON and wait at least 2 seconds or more.
-
Select “Self Diagnostic Result” mode of “SONAR”.
-
Is DTC U1010–00 detected?
YES >>Proceed to DTC Diagnosis Procedure.
NO >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
DESCRIPTION
CAN (Controller Area Network) is a serial communication
line for real-time application. It is an on-Nissan Sentra vehicle multiplex communication
line with high ...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
CONSULT
Ignition switch ON.
...
Other materials:
Abs Actuator and Electric Unit (control Unit)
Exploded View
Exploded View
1.
ABS actuator and electric unit
(control unit)
2.
Insulator
collar
...
Work Flow
Work Flow
OVERALL SEQUENCE
Reference 1: Refer to CONSULT Function.
Reference 2: Refer to DTC Index.
Reference 3: Refer to Symptom Table.
DETAILED FLOW
INTERVIEW AND SYMPTOM
CONFIRMATION
Check ...
P2765 Input speed sensor B
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible causes
P2765
INPUT SPEED SENSOR B
(Input/Turbine Speed Sensor
B Circuit)
The secondary speed sensor value is less
than 150 rpm continuously ...
