Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON.
-
Ignition switch OFF and wait at least 30 seconds.
-
Ignition switch ON and wait at least 2 seconds or more.
-
Select “Self Diagnostic Result” mode of “SONAR”.
-
Is DTC B2721 detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnos ...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
DETERMINE MALFUNCTION TYPE
CONSULT
Ignition switch ON.
...
Other materials:
Steering Gear and Linkage
Inspection
Inspection
INSPECTION AFTER DISASSEMBLY
STEERING GEAR
Check steering gear housing and boots for
looseness, damage and grease leakage.
Check connection with steering column for
looseness.
...
P0847-00 Transmission Fluid Pressure Sensor/switch B
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
Fail Safe
Fail Safe
FAIL-SAFE CONTROL BY POWER WINDOW MOTOR
Power window motor switches power window
operation to fail-safe control when malfunction is detected.
Detected item
Judgment condition
...
