Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Electrical & Power Control / Body Control System :: Dtc/circuit Diagnosis / U215b-87 Can Comm Err (ipdm E/r) / Dtc Confirmation Procedure

DTC Confirmation Procedure

DTC CONFIRMATION
1. CONSULT
  1. Ignition switch ON and wait for 2 seconds or more.
  2. Select “Self Diagnostic Result” mode of “BCM”.
Is DTC detected?
YES >>
Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DESCRIPTION CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Sentra vehicle multiplex communication line with hig ...

Dtc Diagnosis Procedure

DTC Diagnosis Procedure CHECK CAN COMMUNICATION Check CAN communication. Refer to Trouble Diagnosis Flow Chart. Is DTC “U215B–87� ...

Other materials:

Component Parts
Telematics System Component Parts Location Component Parts Location No. Component Function 1. ...

Component Inspection
Component Inspection CHECK TRUNK ROOM LAMP SWITCH Ignition switch OFF. Disconnect trunk lid opener assembly (ajar switch)connector. Check continuing bet ...

Normal Operating Condition
Description Description RELATED TO NOISE The majority of the audio concerns are the result of outside causes (bad CD, electromagnetic interference, etc.). The following noise results from variations in field strength, such as fading noise and multi-path noise, or external no ...