Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Electrical & Power Control / Body Control System :: Dtc/circuit Diagnosis / U214e-87 Can Comm Err (combination Meter) / Dtc Confirmation Procedure

DTC Confirmation Procedure

DTC CONFIRMATION
1. CONSULT
  1. Ignition switch ON and wait for 2 seconds or more.
  2. Select “Self Diagnostic Result” mode of “BCM”.
Is DTC detected?
YES >>
Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DESCRIPTION CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Sentra vehicle multiplex communication line with hig ...

Dtc Diagnosis Procedure

DTC Diagnosis Procedure CHECK CAN COMMUNICATION Check CAN communication. Refer to Trouble Diagnosis Flow Chart. Is DTC “U214E–87� ...

Other materials:

Doors
When the doors are locked using one of the following methods, the doors cannot be opened using the inside or outside door handles. The doors must be unlocked to open the doors. WARNING Always have the doors locked while driving. Along with the use of seat belts, this provides ...

Removal and Installation
Removal and Installation REMOVAL Remove the cowl top. Refer to Removal and Installation. Disconnect the harness connector from the wiper drive assembly. Remove the wiper drive assembly bolts. Remove the wiper drive assembly. INSTALLATION Install the wiper d ...

Component Function Check
Component Function Check CHECK THE ILLUMINATION OF THE EPS WARNING LAMP Ignition switch ON. Check that the EPS warning lamp turns ON, then, EPS warning lamp turns OFF a ...