Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
PERFORM SELF DIAGNOSTIC RESULT
-
CONSULTSelect “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)”.
Is DTC “C1734-68” detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional informatio ...
Other materials:
Diagnosis System [chassis Control Module (with Built in Steering Angle Sensor)]
Consult Function
CONSULT Function
APPLICATION ITEMS
CONSULT can display each diagnostic item using the diagnostic test
modes as follows.
Diagnosis mode
CGW Status
...
Body alignment
Body Center Marks
A mark has been placed on each part of the body to indicate the vehicle
center. When repairing parts damaged
by an accident which might affect the vehicle frame (members, pillars, etc.),
more accurate and effective
repair will be possible by using these marks together with ...
Removal and Installation
Removal and Installation
REMOVAL
Remove the
headlining. Refer to Removal and Installation.
Remove the
sunshade stoppers [1 (LH/RH)] from the moonroof unit assembly side
rails (2).
:
Front
Remove
sunshade from moonroof unit assembly.
INSTALLATION
Installa ...
