Nissan Sentra B18 (2020-2025) Service Manual: Drive Shaft
Drive Shaft Specifications
 |
 |
|||
|
Application |
M/T |
|||
|
Joint type |
Wheel side |
Transaxle side |
||
|
(LH) |
(RH) |
(LH) |
(RH) |
|
|
Grease amount* |
105 - 125 g (3.70 - 4.41 oz) |
130 - 140 g (5.49 - 4.94 oz) |
||
|
Molykote M77 lubricant* |
1.0 - 3.0 g (0.04 - 0.11 oz) |
|||
|
Boot installed length (L) |
94.80 mm (3.732 in) |
87.10 mm (3.429 in) |
||
*: Always check with the Parts Department for the latest parts information.
Drive Shaft Specifications
|
|
|||
|
Application |
CVT |
|||
|
Joint type |
Wheel side |
Transaxle side |
||
|
(LH) |
(RH) |
(LH) |
(RH) |
|
|
Grease amount* |
85 - 105 g (3.00 - 3.70 oz) |
130 - 140 g (4.59 - 4.94 oz) |
||
|
Molykote M77 lubricant* |
1.0 - 3.0 g (0.04 - 0.11 oz) |
|||
|
Boot installed length (L) |
93.50 mm (3.681 in) |
87.10 mm (3.429 in) |
||
*: Always check with the Parts Department for the latest parts information.
Dynamic Damper Specifications
Unit: mm (in) |
||||||
|---|---|---|---|---|---|---|
|
Application |
M/T |
CVT |
||||
|
(LH) |
(RH) |
(LH) |
(RH) |
|||
|
Dimension (A) |
240.1 - 246.1 (9.45 - 9.69) |
230.10 - 236.10 (9.06 - 9.30) |
238.80 - 244.80 (9.40 - 9.64) |
228.80 - 234.80 (9.01 - 9.24) |
||
Boot Band Specification
Unit: mm (in)
|
||
|
Dimension (A) - maximum |
7.0 (0.276) |
|
Wheel Bearing
Wheel Bearing
Item
Standard
Axial end play
...
Other materials:
ECU diagnosis information
A/C AUTO AMP
Reference Value
TERMINAL LAYOUT
PHYSICAL VALUES
*:With manual A/C
ECM, IPDM E/R, BCM
List of ECU Reference
...
Cvt Position
Inspection
Inspection
Place selector lever in “P” position,
and place ignition switch ON (engine stop).
Make sure that selector lever can
be shifted to other than “P” position when brake pedal is depressed.
Also make sure that selector lever can be shifted from “P” ...
Exploded View
Exploded View
1.
Floor trim
2.
Front floor spacer (RH)
3.
Front floor s ...
