Nissan Sentra B18 (2020-2025) Service Manual: Door Sash Cover
Exploded View
Exploded View
|
1. |
Front door |
2. |
Front door sash cover |
3. |
Rear door sash cover |
|
4. |
Rear door |
5. |
Double-sided tape |
|
Pawl |
Removal and Installation
Removal and Installation
REMOVAL
Using suitable tool, lift door sash cover and cut double-sided tape. Refer to Exploded View.
Using suitable tool, release pawl and remove door sash cover. Refer to Exploded View.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Clean door sash and door sash cover before installation.
-
Replace double-sided tape if door sash cover is reused.
-
Do not wash or expose Nissan Sentra vehicle to a wet environment within 24 hours of installation.
Other materials:
Cannot Set Automatic Speed Control Device (ascd)
Diagnosis Procedure
Diagnosis Procedure
PERFORM SELF-DIAGNOSIS
With CONSULT
Perform ECM self-diagnosis.
Is DTC detected?
YES >>
Perform diagnosis of applicable.
NO >>
GO TO 2.
CHECK BRAKE PEDAL POSITION SWITCH
...
Engine cooling system
The engine cooling system of the Nissan Sentra is factory-filled with a pre-diluted
mixture consisting of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and
50% water. This formulation is designed to provide reliable, year-round antifreeze
protection and effective engine cooling perfor ...
Air Pressure Monitor
Consult Function (bcm - Air Pressure Monitor)
CONSULT Function
(BCM - AIR PRESSURE MONITOR)
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions. Refer to the Signal Tech II User
Guide for additional information.
Activate and ...