Nissan Sentra B18 (2020-2025) Service Manual: Diagnosis Procedure
-
CHECK CUSHION HEATER RH
-
Check cushion heater RH.
Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Refer to Diagnosis Procedure.
-
-
CHECK SEAT HEATER RH (BACK) POWER SUPPLY
-
-
Disconnect seat heater RH (back) connector.
-
Ignition switch ON.
-
Check voltage between seat heater RH (back) harness connector and ground.
(+)
(–)
Condition
Voltage
(Approx.)
Seat heater RH (back)
Connector
Terminal
B334
1
Ground
Heated seat switch RH (HIGH)
ON
Battery voltage
Other than above
0 V
Heated seat switch RH (LOW)
ON
Battery voltage
Other than above
0 V
-
Is the inspection result normal?
YES>>GO TO 3.
NO>>Replace front seat heater RH. Refer to Exploded View.
-
-
CHECK SEAT HEATER RH (BACK) GROUND CIRCUIT
-
-
Turn heated seat switch OFF.
-
Ignition switch OFF.
-
Check continuity between seat heater RH (back) harness connector and ground.
Seat heater RH (back)
(–)
Continuity
Connector
Terminal
B334
2
Ground
Yes
-
Is the inspection result normal?
YES>>Replace seat heater RH (back). Refer to Exploded View.
NO>>Repair or replace harness.
-
Component Function Check
Component Function
Check
CHECK FUNCTION
Check that the seat heater RH (back) warms to the
preset temperature when operating the heated seat swit ...
Other materials:
Confirmation Procedure
Confirmation Procedure
PRECONDITIONING
If “Confirmation Procedure” has been
previously conducted, always place the ignition switch OFF and wait
at least 10 seconds before conducting the next test.
>&g ...
P2619 Crankshaft Position Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Exploded View
Exploded View
1.
LATCH bracket (LH/RH)
A.
Refer to Removal and Installation.
...
