Nissan Sentra B18 (2020-2025) Service Manual: Description
If any of the following operations are performed, the initialization is necessary for normal operation of anti-pinch function:
-
Disconnection and connection of battery cable from negative terminal.
-
When main power window and door lock/unlock switch replaced.
-
Electric power supply to main power window and door lock/unlock switch or front power window motor LH is interrupted by blown fuse or disconnection and connection of the negative terminal of battery, etc.
-
Disconnection and connection of main power window and door lock/unlock switch harness connector.
-
Removal of front power window motor LH from regulator assembly.
-
Operation of regulator assembly as an independent unit.
-
Removal and installation of glass.
-
Removal and installation of door glass run.
Work Procedure
Work Procedure
CHECK ANTI-PINCH FUNCTION
Fully open the door window.
Place a piece of wood n ...
Other materials:
Diagnosis Procedure
Diagnosis Procedure
CHECK HEATED SEAT RELAY
Check heated seat relay.
Refer to Component Function Check (LH) or Component Function Check (RH).
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
...
Rapid air pressure loss
Rapid air pressure loss or a “blow-out” can occur
if the tire is punctured or is damaged due to
hitting a curb or pothole. Rapid air pressure loss
can also be caused by driving on under-inflated
tires.
Rapid air pressure loss can affect the handling
and stability of the vehicle, especially ...
Diagnosis Procedure
Diagnosis Procedure
CHECK AIR BAG MODULE AND SEAT BELT
PRE-TENSIONER
Check the deployment of air bag module.
Is air bag module deployed?
YES >>
Replace the malfunctioning parts.
NO >>
GO TO 2.
...
