Nissan Sentra B18 (2020-2025) Service Manual: Description
CAUTION:
When replacing the BCM, a new BCM must be used. The functions controlled by the BCM do not operate properly if a BCM from another Nissan Sentra vehicle is used.
Perform the system initialization when replacing BCM, replacing Intelligent Key or registering an additional Intelligent Key.
Other materials:
System description
Refrigeration system
Component part location
High-pressure service port
High-pressure pipe
Expansion valve
Low-pressure service port
Low-pressure flexible hose
Compressor
Refrigerant pressure sensor
Condenser and liquid tank assembly
High-pressure flexible hose
Refrigera ...
Front Auxiliary Input Jacks
Removal and Installation
Removal and Installation
REMOVAL
Remove
cluster lid C. Refer to Removal and Installation.
Using a
suitable tool, release pawls on the front auxiliary input jacks
(1), then remove from the front of cluster lid C (2).
...
Trunk Lid Striker
Removal and Installation
Removal and Installation
REMOVAL
Remove the
trunk rear finisher. Refer to Removal and Installation.
Remove
bolts (A).
Remove
trunk lid striker (1).
INSTALLATION
Installation is in the reverse order of
removal.
CAUTION:
...
