Trouble diagnoses indicate work procedures required to diagnose problems effectively. Observe the following instructions before diagnosing.
Before performing trouble diagnoses, read the “Work Flow” in each section.
After repairs, re-check that the problem has been completely eliminated.
Refer to Component Parts and Harness Connector Location for the Systems described in each section for identification/location of components and harness connectors.
When checking circuit continuity, ignition switch should be OFF.
Refer to the Circuit Diagram for quick pinpoint check.
If you need to check circuit continuity between harness connectors in more detail, such as when a sub-harness is used, refer to Wiring Diagram in each individual section and Harness Layout in PG section for identification of harness connectors.
Before checking voltage at connectors, check battery voltage.
After accomplishing the Diagnosis Procedures and Electrical Components Inspection, make sure that all harness connectors are reconnected as they were.
How to Follow Test Groups in Trouble DiagnosisCamshaft
Exploded View
Camshaft position sensor (EXH)
O-ring
Camshaft bracket
Camshaft (EXH)
Camshaft sprocket (EXH)
Camshaft sprocket (INT)
Camshaft (INT)
Valve lifter (EXH)
Valve lifter (INT)
Signal plate (INT)
Signal plate (EXH)
O-ring
Camshaft position sensor (INT)
A. ...
Text messaging
WARNING
Laws in some jurisdictions may restrict
the use of some of the applications and
features, such as social networking and
texting. Check local regulations for any
requirements.
Laws in some jurisdictions may restrict
the use of “Text-to-Speech”. Check loc ...
Air Pressure Monitor
Consult Function (bcm - Air Pressure Monitor)
CONSULT Function (BCM - AIR PRESSURE MONITOR)
BCM
Refer to CONSULT Function (BCM - AIR PRESSURE
MONITOR).
...