Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure
-
DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON.
-
Ignition switch OFF and wait at least 30 seconds.
-
Ignition switch ON and wait at least 2 seconds or more.
-
Select “Self Diagnostic Result” mode of “SONAR”.
-
Is DTC U0075–00 detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
...
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
PERFORM DTC CONFIRMATION PROCEDURE
AGAIN
CONSULT
Ignition switch ON.
...
Other materials:
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
...
Inspection
Inspection
APPEARANCE
Check the surface of the disc brake rotor for
uneven wear, cracks, or damage. Replace the disc brake rotor if any
abnormal conditions exist. Refer to Removal and Installation.
RUNOUT
Check the
wheel bearing axial end play before the inspection. Refer to Ins ...
NISSAN Vehicle Immobilizer System keys
You can only drive your vehicle using the master
keys which are registered to the NISSAN Vehicle
Immobilizer System components in your vehicle.
These keys have a transponder chip in the key
head.
The master key can be used for all the locks.
Never leave these keys in the vehicle.
Addition ...
