Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure
-
PERFORM COMPONENT FUNCTION CHECK
-
CONSULT-
Start engine and wait for 10 seconds or more.
-
Select “Self Diagnostic Result” mode of “IPDM E/R”.
-
Is the inspection result normal?
YES>>To check malfunction symptom before repair: Refer to Intermittent Incident.
YES>>Confirmation after repair: Inspection End.
NO>>Refer to DTC Diagnosis Procedure.
-
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis cont ...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
CHECK BATTERY CURRENT SENSOR POWER
Ignition switch OFF.
Disconne ...
Other materials:
Turn Signal Lamp Circuit
Component Function Check
Component Function
Check
CHECK TURN SIGNAL LAMP OPERATION
CONSULT
Select “FLASHER” in "Active Test" mode of “BCM(FLASHER)".
With operating the t ...
System Setting
Target Evaporator Temp Upper Limit
Target Evaporator
Temp Upper Limit
DESCRIPTION
Set the target evaporator temperature upper limit.
HOW TO SET
CONSULT
Select “TARGET EVAPORATOR TEMP UPPER LIMIT SETTING”
in “Work support” mode of “HVAC”.
...
Rear-facing child restraint installation using LATCH
Do not use the LATCH lower anchors if the combined weight of the child and the
child restraint exceeds 65 lbs (29.5 kg). If the combined weight is greater than
65 lbs (29.5 kg), install the child restraint using the vehicle’s seat belt instead
of the lower anchors. Always follow the child re ...
