Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Power Window Control System :: Dtc/circuit Diagnosis / B2c41-04 Iflw / Confirmation Procedure

Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch ON.
  2. Keep pulling the main power window and door lock/unlock switch AUTO-UP for 5 seconds or more.
  3. Keep pressing the main power window and door lock/unlock switch AUTO-DOWN for 5 seconds or more.
  4. Select “Self Diagnostic Result” mode of “BCM”.
  5. Check DTC.
Is DTC detected?
YES >>
Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis ...

Dtc Diagnosis Procedure

DTC Diagnosis Procedure REPLACE FRONT POWER WINDOW MOTOR LH Replace front power window motor LH. Refer to Removal and Instal ...

Other materials:

General maintenance
During normal day-to-day operation of the Nissan Sentra, general maintenance should be carried out regularly as outlined in this section. If you notice any unusual noises, vibrations, or odors, identify the cause promptly or have the vehicle inspected without delay. In addition, if you believe ...

Component Inspection
Component Inspection CHECK MIRROR SWITCH & CHANGEOVER SWITCH Ignition switch OFF. Disconnect door mirror remote control switch connector. Check d ...

Removal and Installation
Removal and Installation REMOVAL Remove front pillar finishers (LH/RH). Refer to Removal and Installation. Remove front seat assemblies. Refer to the following. Removal and Installation - Seat Assembly (Driver Seat). Removal and Installation - Se ...