Nissan Sentra B18 (2020-2025) Service Manual: B2c41-04 Iflw
Dtc Description
DTC Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|---|---|---|---|
|
B2C41-04 |
IFLW [Power window motor (front left hand)] |
Diagnosis condition |
When ignition switch ON or power window timer operates. |
|
Signal (terminal) |
— |
||
|
Threshold |
CPU in front power window motor LH detect internal malfunction. |
||
|
Diagnosis delay time |
10 seconds |
||
POSSIBLE CAUSE
Front power window motor LH
FAIL SAFE
Front power window motor LH operation is stop or inching.
Confirmation Procedure
Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON.
-
Keep pulling the main power window and door lock/unlock switch AUTO-UP for 5 seconds or more.
-
Keep pressing the main power window and door lock/unlock switch AUTO-DOWN for 5 seconds or more.
-
Select “Self Diagnostic Result” mode of “BCM”.
-
Check DTC.
-
Is DTC detected?
YES >>Refer to DTC Diagnosis Procedure.
NO >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>Confirmation after repair: Inspection End.
-
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
-
REPLACE FRONT POWER WINDOW MOTOR LH
-
-
Replace front power window motor LH. Refer to Removal and Installation.
-
Perform DTC confirmation procedure. Refer to Confirmation Procedure.
-
Is DTC detected?
YES >>Check intermittent incident. Refer to Intermittent Incident.
NO >>Inspection End.
-
Other materials:
P0078 Evt Control Solenoid Valve
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Dtc Diagnosis [8ch Can Gateway (8ch Can Gateway)]
B2600-42 Config Error
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detected
...
Power Supply, Ground & Circuit Elements. Basic Inspection
Battery
How to Handle Battery
How to Handle Battery
CAUTION:
If it becomes necessary to start the engine with
a booster battery and jumper cables, use a 12-volt booster
battery.
After connecting battery cables, ensure that they
...