Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON and wait for 10 seconds or more.
-
Select “Self Diagnostic Result” mode of “HANDS FREE MODULE”.
-
Is DTC detected?
YES >>Refer to DTC Diagnosis Procedure.
NO >>To check malfunction symptom before repair. Refer to Intermittent Incident.
NO >>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
...
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
CHECK DOOR REQUEST SWITCH INPUT
SIGNAL
Ignition switch OFF.
...
Other materials:
Terms
It is important to familiarize yourself with
the following terms before loading your
vehicle:
Curb Weight (actual weight of your
vehicle) - vehicle weight including:
standard and optional equipment, fluids,
emergency tools, and spare tire
assembly. This weight does not include
passen ...
Headlamp (lo) circuit
Description
The ipdm e/r (intelligent power distribution module engine room) controls the
headlamp low relay based on
inputs from the bcm over the can communication lines. When the headlamp low
relay is energized, power
flows through fuses 43 and 44, located in the ipdm e/r. Power then flows ...
Additional Service When Removing Battery Negative Terminal
Special Repair Requirement
Special Repair
Requirement
Required Procedure
After Battery Disconnection
System
Item
Reference
...
