Nissan Sentra B18 (2020-2025) Service Manual: Component Inspection
-
CHECK HEATED STEERING WHEEL CONTINUITY
-
Check continuity between heated steering wheel connector terminals.
Heated steering wheel
Condition
Continuity
Terminals
43 − 44
Leather surface temperature of 68°F (20°C) or less
Yes
Leather surface temperature of 86°F (30°C) or more
No
Is the inspection result normal?
YES >>GO TO 2.
NO >>Replace heated steering wheel. Refer to Removal and Installation.
-
-
CHECK HEATED STEERING WHEEL RESISTANCE
-
Check resistance between heated steering wheel connector terminals.
Heated steering wheel
Condition
Resistance
(Approx.)
Terminals
43 − 44
Leather surface temperature of 68°F (20°C)
1.7 – 2.17 Ω
Is the inspection result normal?
YES >>Inspection End.
NO >>Replace heated steering wheel. Refer to Removal and Installation.
-
Diagnosis Procedure
Diagnosis Procedure
CHECK FUSES
Check that the following fuses are not
blown:
...
Other materials:
Dtc/circuit diagnosis
Door mirror remote control switch (mirror switch/changeover switch)
Component Inspection
1.Check mirror switch & changeover switch
Turn ignition switch off.
Disconnect door mirror remote control switch connector.
Check door mirror remote control switch.
Is the inspection result ...
Front wheel hub and knuckle
Inspection
COMPONENT PART
Check that the mounting conditions (looseness, backlash) of each component
and component conditions
(wear, damage) are normal.
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)
Check the following items, and replace the part if necessary.
Move the wheel hub and bearin ...
Common Item
Consult Function (bcm - Common Item)
CONSULT Function (BCM - COMMON ITEM)
BCM
Refer to CONSULT Function (BCM- COMMON ITEM).
...
