Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Component Function Check

Component Function Check

  1. CHECK FUNCTION

    1. CONSULT

      1. Select "Hood switch" in "Data Monitor" mode of "IPDM E/R".

      2. Check "Hood switch" indication under the following condition:

      Monitor item

      Condition

      Indication

      Hood switch

      Hood

      Open

      OFF

      Close

      ON

    Is the indication normal?

    YES >>

    Hood switch is OK.

    NO >>

    Go to Diagnosis Procedure.

Hood Switch
...

Diagnosis Procedure
Diagnosis Procedure CHECK HOOD SWITCH SIGNAL CIRCUITS Ignition switch OFF. Disconnect hoo ...

Other materials:

Power supply and ground circuit
Av control unit Av control unit : diagnosis procedure Regarding Wiring Diagram information, refer to AV-234, "Wiring Diagram". 1.Check fuse Check that the following fuses are not blown. Are the fuses blown? Yes >> replace the blown fuse after repairing the affected circuit. ...

Tcu
Values on the Diagnosis Tool Values on the Diagnosis Tool Note: The following table includes information (items) inapplicable to this Nissan Sentra vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items. ...

The Ambient Temperature Display Is Incorrect
Description Description The displayed outside air temperature is higher than the actual temperature. The displayed outside air temperature is lower than the actual temperature. Outside air temperature is not indicated. Diagno ...

В© 2014-2026 Copyright www.nisentra.com