Nissan Sentra B18 (2020-2025) Service Manual: Common Item
Consult Function (bcm - Common Item)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM:
|
Diagnosis mode |
CGW Status |
Function Description |
||
|---|---|---|---|---|
|
Restricted Mode |
Diag Test Mode |
Open Mode |
||
|
Self Diagnostic Result |
Display |
Display |
Display |
Displays non-network DTC which the BCM memorizes. |
|
CGW Information |
Display |
Display |
Display |
|
|
Data Monitor |
Display |
Display |
Display |
Displays the BCM input/output data in real time. |
|
Work Support |
Non-display |
Non-display |
Display |
Changes the settings for each system function |
|
Active Test |
Non-display |
Display |
Display |
Enables an operational check of a load by transmitting a driving signal from the BCM to the load. |
|
ECU Identification |
Display |
Display |
Display |
Displays BCM part number. |
|
Configuration |
Display |
Display |
Display |
|
|
Network-DTC |
Display |
Display |
Display |
Display network DTC which the BCM memorizes when performing "Diagnosis (All System)". |
CGW Information
Displays the diagnosis mode which a user can perform in Diag Test mode/Open Mode by switching the CGW status from Restricted mode to Diag Test Mode/Open Mode.
For the method of switching CAN Gateway status, Refer to CONSULT Function.
SYSTEM APPLICATION
The BCM can perform the following functions for each system:
Note:
It can perform the diagnosis modes except the following for all sub system selection items:
×: Applicable item|
System |
Sub system selection item |
Diagnosis mode |
Reference |
||
|---|---|---|---|---|---|
|
Work Support |
Data Monitor |
Active Test |
|||
|
Door lock |
DOOR LOCK |
— |
× |
— |
CONSULT Function (BCM - DOOR LOCK) |
|
Rear window defogger |
REAR DEFOGGER |
— |
— |
× |
CONSULT Function (BCM - REAR DEFOGGER) |
|
Exterior lamp |
HEAD LAMP |
— |
× |
× |
CONSULT Function (BCM - HEAD LAMP) |
|
Interior room lamp |
INT LAMP |
— |
× |
× |
CONSULT Function (BCM - INT LAMP) |
|
Wiper and washer |
WIPER |
— |
× |
× |
CONSULT Function (BCM - WIPER) |
|
Turn signal and hazard warning lamps |
FLASHER |
— |
× |
× |
CONSULT Function (BCM - FLASHER) |
|
Intelligent Key |
INTELLIGENT KEY |
— |
× |
— |
CONSULT Function (BCM - INTELLIGENT KEY) |
|
Combination switch |
COMB SW |
— |
× |
— |
CONSULT Function (BCM - COMB SW) |
|
Body control system |
BCM |
× |
× |
— |
CONSULT Function (BCM - BCM) |
|
Immobilizer |
IMMU |
— |
× |
× |
CONSULT Function (BCM -IMMU) |
|
Interior room lamp battery saver |
BATTERY SAVER |
— |
× |
— |
CONSULT Function (BCM - BATTERY SAVER) |
|
Trunk lid |
TRUNK |
— |
× |
× |
CONSULT Function (BCM - TRUNK) |
|
Nissan Sentra Vehicle security system |
THEFT ALM* |
— |
× |
— |
— |
|
Remote keyless entry |
MULTI REMOTE ENT |
— |
× |
— |
CONSULT Function (BCM - MULTI REMOTE ENT) |
|
Signal buffer |
SIGNAL BUFFER |
— |
× |
— |
CONSULT Function (BCM - SIGNAL BUFFER) |
|
Tire pressure monitoring |
AIR PRESSURE MONITOR |
× |
× |
— |
CONSULT Function (BCM - AIR PRESSURE MONITOR) |
*: This item is displayed, but not used.
FREEZE FRAME DATA (FFD)
The BCM records the following Nissan Sentra vehicle conditions at the time a particular DTC is detected, and displays on CONSULT:
|
CONSULT screen item |
Indication/Unit |
Description |
|---|---|---|
|
BATTERY VOLTAGE |
V |
Battery voltage the moment a particular DTC is detected. |
|
Nissan Sentra Vehicle SPEED |
mph/km/h |
Nissan Sentra Vehicle speed the moment a particular DTC is detected. |
|
EXTERNAL TEMP |
°F/°C |
External temperature the moment a particular DTC is detected. |
|
Nissan Sentra Vehicle COND |
— |
Note:
This item is displayed, but cannot be used. |
|
DOOR LOCK STATUS |
— |
Note:
This item is displayed, but cannot be used. |
|
POWER SUPPLY COUNTER |
min |
Displays the cumulative time from the time that the battery terminal is connected. |
Door Lock
Consult Function (bcm - Door Lock)
CONSULT Function (BCM - DOOR LOCK)
DATA MONITOR
Note:
The following table includes information (items)
inapplicable to this Nissan Sentra vehicle. For ...
Other materials:
Inside mirror
Exploded view
Manual mirror
Windshield glass
Inside mirror base
Inside mirror assembly
Auto anti-dazzle mirror
Windshield glass
Inside mirror base
Harness connector
Mirror screw
Inside mirror assembly
Inside mirror cover
Removal and installation
Manual mirror
...
B24b4-02 A/c Control
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
...
Main line between dlc and av circuit
Diagnosis procedure
1.Check harness continuity (open circuit)
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Disconnect the following harness connectors.
ECM
AV control unit
Check the continuity between the data link connector and the av ...
