|
Tool name |
Description |
|
|---|---|---|
|
Ball joint remover |
![]() |
Removing hub bolt |
|
Power tool |
![]() |
Loosening nuts, screws and bolts |
PreparationInspection and Adjustment
Inspection and Adjustment
SYSTEM INITIALIZATION (IF NECESSARY)
If any of
the following occur, system initialization must be
performed.
Electric power supply to power window switch or
motor is interrupted by blown fuse or disconnecting battery cable,
etc.
...
Trip Reset Switch Signal Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK TRIP RESET SWITCH SIGNAL
Ignition switch ON.
Check voltage between the following terminals of
the trip reset switch harness con ...
Ignition coil
Exploded View
Ignition coil
Spark plug
Rocker cover
Removal and Installation
REMOVAL
Remove the engine room cover. Refer to EM-24, "Exploded View".
Disconnect the harness connector from the ignition coil.
Remove the ignition coil.
CAUTION:
Do not drop or shock i ...