Dtc Description
DTC DETECTION LOGIC
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|---|---|---|---|---|
|
C1F6B |
82 |
CAMERA UNIT MALF (Camera unit malfunction) |
Diagnosis condition |
|
|
Signal (terminal) |
CAN communication signal |
|||
|
Threshold |
ADAS control unit 2 detects an error signal that is received from lane camera via CAN communication |
|||
|
Diagnosis delay time |
1 second or less |
|||
POSSIBLE CAUSE
Front camera unit
FAIL-SAFE
The following systems are canceled.
AEB
LDW
TSR
I-FCW
Confirmation Procedure
CHECK DTC PRIORITY
If DTC “C1F6B-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES >>Perform diagnosis of applicable. DTC Index
NO >>GO TO 2 .
PERFORM DTC CONFIRMATION PROCEDURE
Start the engine.
Turn the AEB system ON.
Perform “All DTC Reading” with CONSULT.
Check if the “C1F6B-82” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F6B-82” detected as the current malfunction?
YES >>DTC Diagnosis Procedure
NO-1 >>To check malfunction symptom before repair: Intermittent Incident
NO-2 >>Confirmation after repair: INSPECTION END
Dtc Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F6B-82” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES >>Perform diagnosis of applicable. DTC Index
NO >>GO TO 2 .
CHECK FRONT CAMERA UNIT SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “LANE CAMERA”.
Is any DTC detected?
YES >>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. DTC Index
NO >>Replace the ADAS control unit 2. Removal and Installation
C1f6b-54 Camera UnitShift position indicator circuit
Component Parts Function Inspection
1.CHECK SHIFT POSITION INDICATOR
Start the engine.
Shift selector lever.
Check that the selector lever position and the shift position indicator
on the combination meter are identical.
Is the inspection result normal?
YES >> INSPECTION END
N ...
Component Inspection
Component Inspection
CHECK INTELLIGENT KEY WARNING
BUZZER
Ignition switch OFF.
Disconnect Intelligent Key warning buzzer
connector.
...
Handling Precaution
Precaution for Idle Start/stop System
Precaution for Idle Start/Stop System
PRECAUTIONS FOR IDLE START/STOP SYSTEM OPERATION
The operation of the idle start/stop system system needs to
satisfy various conditions. For details of the conditions, refer to System Description.
The idle start ...