Nissan Sentra B18 (2020-2025) Service Manual: C1f5f-A2 Distance Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|---|---|---|---|---|
|
C1F5F |
A2 |
ICC SENSOR MALF (Intelligent cruise control sensor malfunction) |
Diagnosis condition |
When ignition switch is ON |
|
Signal (terminal) |
CAN communication |
|||
|
Threshold |
Distance sensor power supply voltage is malfunction |
|||
|
Diagnosis delay time |
1 second or less |
|||
POSSIBLE CAUSE
-
Harness, connector, fuse
-
Distance sensor
FAIL-SAFE
The following systems are canceled.
-
Nissan Sentra Vehicle-to-vehicle distance control mode
-
Conventional (fixed speed) cruise control mode
-
AEB
-
I-FCW
Confirmation Procedure
Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
Turn the ignition switch ON.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F5F-A2” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F5F-A2” detected as the current malfunction?
YES >>DTC Diagnosis Procedure
NO-1 >>To check malfunction symptom before repair: Intermittent Incident
NO-2 >>Confirmation after repair: INSPECTION END
-
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
-
CHECK DISTANCE SENSOR SUPPLY AND GROUND CIRCUIT
Check power supply and ground circuit of distance sensor. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES >>Replace the distance sensor. Refer to Removal and Installation
NO >>Repair or replace the malfunctioning parts.
Other materials:
C1076-55 Control Unit
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen item
(Trouble diagnosis
content)
DTC detection condition
...
Trunk Opener Request Switch
Component Function Check
Component Function Check
CHECK FUNCTION
CONSULT
Select "Request switch BD/TR" in "Data Monitor"
mode of "BCM(TRUNK)".
Select that the functi ...
Low Tire Pressure Warning Lamp Does Not Turn Off
Symptom Description
Symptom Description
The low tire pressure warning lamp does not turn
OFF after several seconds is passed after the engine starts.
Diagnosis Procedure
Diagnosis Procedure
CHECK TIRE PRESSURE
Ignition switch ...