Nissan Sentra B18 (2020-2025) Service Manual: Brake System. Periodic Maintenance Operation
Periodic Maintenance Operation
Periodic Maintenance Operation
ADJUSTMENT
CAUTION:
-
Burnish the brake contact surfaces after refinishing or replacing rotors, after replacing pads, after refinishing or replacing drums, after replacing shoes, or if a soft pedal occurs at very low mileage.
-
Be careful of Nissan Sentra vehicle speed. Brakes do not operate firmly/securely until the pads are securely seated with the rotors and the shoes are securely seated with the drums.
-
Only perform this procedure under safe road and traffic conditions. Use extreme caution.
Drive the Nissan Sentra vehicle on a straight, flat road.
Depress the brake pedal until the vehicle stops.
Release the brake pedal for a few minutes to allow the brake components to cool.
Repeat steps 1 to 3 until the pads are securely seated with the rotors and the shoes are securely seated with the drums.
Other materials:
C1f03-72 Stop Lamp Relay
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
C1712-7a Low Tire Pressure Fr
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure rep ...
Trunk Lid
Exploded View
Exploded View
1.
Trunk lid weather-strip
2.
Trunk lid hinge (LH)
3.
...