Nissan Sentra Service Manual: B2267 engine speed
Description
The engine speed signal is transmitted from ecm to the combination meter via can communication.
Dtc logic
Dtc detection logic
| Dtc | Consult | Detection condition | Possible malfunction location |
| B2267 | Tacho meter [b2267] | ECM continuously transmits abnormal engine speed signals for 2 seconds or more |
|
Diagnosis procedure
1.Perform self-diagnosis of ecm
Perform self diagnostic result of ecm, and repair or replace malfunctioning parts.
>> Refer to ec-66, "consult function".
B2205 vehicle speed
Description
The abs actuator and electric unit (control unit) provides a vehicle speed
signal to the combination meter via
can communication lines.
DTC Logic
Dtc detection logic
Dtc
...
B2268 water temp
Description
The engine coolant temperature signal is transmitted from ecm to the
combination meter via can communication.
Dtc logic
Dtc detection logic
Dtc
Consult
Detection condit ...
Other materials:
System initialization
Description
If any of the following operations are performed, the initialization is
necessary for normal operation of power
window system.
Disconnection and connection of battery cable from negative terminal.
When power window main switch replaced.
Electric power supply to power window m ...
Door lock and unlock switch
Component function check
1.Check function
Select door lock of bcm using consult.
Select cdl lock sw, cdl unlock sw in data monitor mode.
Check that the function operates normally according to the following
conditions.
Is the inspection result normal?
YES >> Main power windo ...
Mixture ratio self-learning value
clear
Description
This describes how to erase the mixture ratio self-learning value. For the
actual procedure, follow the instructions
in “Diagnosis Procedure”.
Work Procedure
1.START
With CONSULT
Start engine and warm it up to normal operating temperature.
Select “SELF-LEARNI ...
