Nissan Sentra B18 (2020-2025) Service Manual: B2223-16 Combination Meter

Nissan Sentra B18 (2020-2025) Service Manual / Driver Information & Multimedia / Meter, Warning Lamp & Indicator :: Type B / Dtc/circuit Diagnosis / B2223-16 Combination Meter

Dtc Description

DTC Description

DTC DETECTION LOGIC

DTC No.	CONSULT screen terms (Trouble diagnosis content)	DTC detected condition
B2223-16	Combination meter (Combination meter)	Diagnosis condition	When ignition switch is ON.
		Signal (terminal)	—
		Threshold	TFT error is detected
		Diagnosis delay time	—

POSSIBLE CAUSE

Combination meter

FAIL-SAFE

—

Confirmation Procedure

Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch ON.
  2. Select “Self Diagnostic Result” mode of “METER/M&A”.
Is DTC B2223-16 detected?
YES >>
Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Ignition switch ON.
  2. Select erase “Self Diagnostic Result” mode of "METER/M&A".
  3. Perform DTC confirmation procedure. Refer to DTC Confirmation Procedure.
Is DTC detected?
YES>>
Replace combination meter. Refer to Removal and Installation.
NO>>
Inspection End.

Other materials:

P2122, P2123 APP Sensor
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P2122 or P2123 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to EC-353, "DTC Logic". DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible caus ...

Dtc Diagnosis Procedure
DTC Diagnosis Procedure CHECK VEHICLE SPECIFICATION Check vehicle specification. >> GO TO 2. PERFORM SELF DIAGNOSTIC RESULT Ignition switch ON. ...

Diagnosis system (combination meter)
Description COMBINATION METER SELF-DIAGNOSIS MODE The information display, speedometer and tachometer can be checked in self-diagnosis mode. STARTING COMBINATION METER SELF-DIAGNOSIS MODE NOTE: Check combination meter power supply and ground circuits if self-diagnosis mode does not star ...